on replacement speakers

Home / the12volt's Install Bay / Car Audio / on replacement speakers (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nicklemay26

Member - Posts: 14

Joined: June 02, 2009

Location: Indiana, United States

Posted: August 30, 2009 at 1:47 PM / IP Logged

i have a kenwood kdc-x693 hu and a mtx thunder 704x amp the amps is rated 70w rms x4 the 5.25 components im installing are 90w rms should this amp be enough for these i got them from a friend for $40 with the crossoverrs and tweeters their an older set of mb quarts dsf 213 i also have polk db 6x9 right now and polk db 3.5 but the 3.5 in the right side blew any recommendations welcome these are going in a 96 dodge ram extended cab

Back to Top

nicklemay26

Member - Posts: 14

Joined: June 02, 2009

Location: Indiana, United States

Posted: September 08, 2009 at 10:31 PM / IP Logged

ok got the mb quarts and a couple questions should i run these and the 6x9s or do away with the 6x9 2nd question on the crossover that came with it there are are four different places fro the speakers on each one one says +3 one says +0 the other says -3 adn one is seperate from the other three i think its fro the small tweeter but where should the main speaker be connected

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

on replacement speakers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.