o scope and enclosure .

Home / the12volt's Install Bay / Car Audio / o scope and enclosure . (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wayneo99

Member - Posts: 5

Joined: September 06, 2009

Location: Colorado, United States

Posted: September 06, 2009 at 9:40 PM / IP Logged

hey would this be a good o-scope to check for clipped signals on my amp?

http://www.amazon.com/gp/product/B0006HJQW0/ref=olp_product_details?ie=UTF8&me=&seller=

also i was wondering what would be a good enclosure size for me?

im going to be running 2 audioque HDC3 12's on 2 aq 2200d amps.

for the box size i want 35"(w) 16"(h) 20"(d). its just a lil over 5 cubes. i want it ported. im thinking tuned to 35-38hz. and i dont really no anything about boxes or ports or anything so how big of a port should i get? any other recommendations for these subs to perform well? i listen to rap.

thanks!

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 06, 2009 at 9:52 PM / IP Logged

Pretty much any oscilloscope will trigger on any audio frequency. This particular scope will trigger on any frequency up to 10MHz. The highest end of the audio spectrum is 20KHz. That scope will do anything you need it to do for any audio application.

The only problem you may encounter with this vs. an actual benchtop scope is that the refresh rate is not nearly as fast as the bench scope. This and most handheld scopes will probably display only a couple frames per second. But for seeing when an amp begins to clip, this will not be a problem.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

o scope and enclosure .

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.