2005 jeep liberty with infinity

it wasnt to bad. take the torx bolts that secure the single amp to the speaker itself out. you will see red and black set of speaker wires going to the speakers male terminals. Cut the red and black wire and extend them. then secure the amp itself to the inside of the door where it pretty much was just sitting (similar to adding a crossover). The windows dont allow for much clearnce so make sure they are down when you are mounting it just to be safe.

Other then the initial shock of seeing an amp on a speaker i wasnt expecting to see, it is very similar to doing a component speaker job. just make sure you let the customer know it will take a lil longer then a coaxial job like i thought it was. I had to do a little extra work and the customer had to wait a lil longer, no big deal. but next time i will know better and now so do you.