2 remote turn on leads on amp?

Home / the12volt's Install Bay / Car Audio / 2 remote turn on leads on amp? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

qdt855

Member - Posts: 4

Joined: September 05, 2009

Posted: September 12, 2009 at 12:14 AM / IP Logged

Hi, I have a GRLA 5500/1D and it has 2 turn on leads. One between one set of ground ports and one between a set of power ports. I currently have just one remote turn on connected to the port between the power port and the amp works fine. Is it neccessary or are there any advantages to connecting a turn on lead to both ports?

AeolianDominate

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 12, 2009 at 5:36 AM / IP Logged

Either one will work just fine. They put 2 on it so you can run remote into the amp and then use the other one to run remote to your second amp.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2 remote turn on leads on amp?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.