the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

subwoofer wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
flgoodwin3 
Member - Posts: 2
Member spacespace
Joined: October 04, 2009
Location: Tennessee, United States
Posted: October 04, 2009 at 3:19 PM / IP Logged  

My amp and subs just blew a couple of days ago :(. So now I'm buying a Crossfire VRA 2000RMSx1ohm amp and two crossfire BMF subs(500RMS each). I'm also thinking about purchasing a SOlo Baric Kicker 15" sub. I think the BMF subs are DVC 4 OHM..they might be 2OHMs. Is it possible to get a 1 OHM load with 2 DVC 4OHM subs (or 2OHM) with a single DVC 4OHM or DVC 2OHM sub? Many possibilities here. Your help is GREATLY appreciated.

Thanks

flgoodwin3 
Member - Posts: 2
Member spacespace
Joined: October 04, 2009
Location: Tennessee, United States
Posted: October 04, 2009 at 3:38 PM / IP Logged  
And what guage wire would you use for the amp?
i am an idiot 
Platinum - Posts: 13,673
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: October 04, 2009 at 4:25 PM / IP Logged  

2 DVC 4 ohm coils = 1 ohm or 4 ohms, or 16 ohms

2 DVC 2 ohm coils = 1/2 ohm, 2 ohms or 8 ohms
Single DVC 4 ohm coils = 2 ohms or 8 ohms
Single DVC 2 ohm coils = 1 ohm or 4 ohms

What wire would I use, The largest wire that the amp's terminals will accept.  Power and speaker wires.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer