2004 chrysler sebring limited

hi. i own a 2004 chrysler sebring limited. i would like to install my subs and amp that i had in my previous vehicle into this car. this car has the infinity sound system. i would like to keep the factory 4 disc player and add the subs and amp. could someone help with how to install the power wire for the amp. i need to know where in the firewall to send it through. i also need to know how to get the factroy deck out, so i can run a remote wire and so i can install a line output converter. i also need to know which wires to look for my remote and rear speaker leads. if someone could please help, i'd greatly appreciate it.thanks

You can probably get to the remote and speaker wires easier at the factory amp that you should have with the infinity package. Look for it under front/rear seats, in trunk, under dash, they are common locations.

Just found this on here after I found out that the 2004-2007 sebring are the same according to metra/best buy. #512283: 2007 CHRYSLER SEBRING 4DR SEDAN WITH 2.4L ENGINE AND 6-SPEAKER AUDIO SYSTEM      Audio/Mobile Video                 WIRE          COLOR          POLARITY          LOCATION            Battery          RED / BROWN          (+)          RADIO HARNESS            Accesory          (CAN DATA BUS)       THIS VEHICLE USES THE CAN NETWORK FOR ACCESSORY TURN ON            Ground          BLACK          (-)          RADIO HARNESS            Illumination          (CAN DATA BUS)            Dimmer          (CAN DATA BUS)            Power Antenna          GRAY/ORANGE          (+)          RADIO HARNESS            Amp Turn On          (CAN DATA BUS)            LF Speaker (+)          GRAY/PURPLE       RADIO HARNESS OR AMP BEHIND GLOVEBOX. WITH AN AMPLIFIER, THE TWEETER WIRE IS GRAY/ORANGE.            LF Speaker (-)          GRAY / YELLOW       RADIO HARNESS OR AMP BEHIND GLOVEBOX. WITH AN AMPLIFIER, THE TWEETER WIRE IS GRAY / YELLOW.            RF Speaker (+)          DARK GREEN/ VIOLET       RADIO HARNESS OR AMP BEHIND GLOVEBOX, WITH AN AMPLIFIER, THE TWEETER WIRE IS GRAY/DARK GREEN.            RF Speaker (-)          DARK GREEN/ YELLOW       RADIO HARNESS OR AMP BEHIND GLOVEBOX. WITH AN AMPLIFIER, THE TWEETER WIRE IS GRAY/LT. GREEN.            LR Speaker (+)          DARK GREEN/ TAN       RADIO HARNESS OR AMP BEHIND GLOVEBOX            LR Speaker (-)          DARK GREEN/ GRAY       RADIO HARNESS OR AMP BEHIND GLOVEBOX            RR Speaker (+)          DARK GREEN/ BROWN       RADIO HARNESS OR AMP BEHIND GLOVEBOX            RR Speaker (-)          YELLOW/GRAY       RADIO HARNESS OR AMP BEHIND GLOVEBOX            Amp Location          BEHIND GLOVEBOX