the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

constant power honda civic 2004


Post ReplyPost New Topic
< Prev Topic Next Topic >
stunt01 
Member - Posts: 3
Member spacespace
Joined: July 01, 2010
Location: Minnesota, United States
Posted: July 01, 2010 at 9:31 AM / IP Logged  
I cannot find constant power when wiring my deck. i do not own a meter and was wondering if anyone knows which factory wire is constant power. I found that the red white is constant power but does not work. the only way to power the deck is to hook both red and yellow wires into the 1 red wire. the problem is that the memory is lost every time i turn my car off. can someone please help guide me to the correct setup method?
stunt01 
Member - Posts: 3
Member spacespace
Joined: July 01, 2010
Location: Minnesota, United States
Posted: July 01, 2010 at 10:31 AM / IP Logged  
is there anyone that could help me?
91stt 
Silver - Posts: 564
Silver spaceThis member consistently provides reliable informationspace
Joined: May 24, 2006
Location: New Jersey, United States
Posted: July 01, 2010 at 1:58 PM / IP Logged  
The color is WHITE/ red but you will still need a meter to confirm that you have the right wire. Otherwise, any information anyone gives you is useless at best or you will damage your car and/or equipment. You can get a relatively inexpensive one at your local autoparts store, Walmart, RadioShack, etc. If you are not getting power to the WHITE/ red wire, check fuse 9 in the underhood fusebox.
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.
stunt01 
Member - Posts: 3
Member spacespace
Joined: July 01, 2010
Location: Minnesota, United States
Posted: July 01, 2010 at 3:17 PM / IP Logged  

how do u get to the cigerette lighter's wire. do i have to take off the whole dash?

brent w 
Member - Posts: 26
Member spacespace
Joined: June 24, 2010
Location: Montana, United States
Posted: July 01, 2010 at 3:26 PM / IP Logged  
another option would be to just run a wire from the battery.  Might not be the easiest thing for someone who doesnt have the equipment though.  Also, would it be acceptable to tap into the 12v constant at the ignition harness?  Would be closer, but if you don't have a DMM i doubt you have a soldering iron.
brent w 
Member - Posts: 26
Member spacespace
Joined: June 24, 2010
Location: Montana, United States
Posted: July 01, 2010 at 3:29 PM / IP Logged  
Since i can't edit, i'll make another reply.  Make sure whatever you do, you fuse our power wire.  Don't want you catching your car on fire constant power honda civic 2004 -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer