04 yukon xm wiring

Home / the12volt's Install Bay / Car Audio / 04 yukon xm wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bubsxl

Member - Posts: 7

Joined: March 06, 2011

Posted: March 06, 2011 at 10:28 AM / IP Logged

I plan to install a Kenwood KOS-A300 to my Yukon. My plan is to tap into the XM input wires into the fatory head unit. Does anybody know off had what the wiring schematic is for the XM reciever ? This is all on an 04 Yukon XL with onstar, XM and Bose (stock 6 disc in dash changer)

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: March 06, 2011 at 11:46 AM / IP Logged

hi,

at xm receiver;

BROWN / white...left audio signal +, pin 2

GREEN / WHITE...right audio signal +, pin 3

BLACK/ white...audio common, pin 10

mark

bubsxl

Member - Posts: 7

Joined: March 06, 2011

Posted: March 06, 2011 at 12:08 PM / IP Logged

So should it be as simple as striping back the rca connections on the Kenwood unit and tap them into those three wires? with the right side going to the GREEN / WHITE and balc k/white and the left side going to BROWN / white and BLACK/ white?

Thanks, Chris

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: March 06, 2011 at 1:02 PM / IP Logged

i'd probably use some type of input selection relay to select either the xm or the KOS. that would require cutting of the signal wires. depends on how you are using the KOS as it does have an AUX in.

bubsxl

Member - Posts: 7

Joined: March 06, 2011

Posted: March 06, 2011 at 2:17 PM / IP Logged

I no longer have use for the XM so I was just going to cut the factory wires and splice in the KOS. Thanks for the diagram.

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: March 06, 2011 at 6:06 PM / IP Logged

you'll have to have the XM still connected for the radio to select the XM/KOS for an input. it can be selected by the radio presently...just preview channel plays?

bubsxl

Member - Posts: 7

Joined: March 06, 2011

Posted: March 06, 2011 at 6:21 PM / IP Logged

Its just the preview. When I bought the truck it still had some subscription left fropm the previous owner, not it is just one of my sources that does nothing for me. Ill have the MX source which will now just be the KOS

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 yukon xm wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.