2011 ram amp wiring

Home / the12volt's Install Bay / Car Audio / 2011 ram amp wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hemi_jeff

Member - Posts: 5

Joined: October 25, 2011

Posted: October 25, 2011 at 9:41 PM / IP Logged

Hello all,

I have a 2011 Ram 1500 with the upgraded Alpine system in it, which means it has a stock amp. What I am looking to do is hook up my alpine mrp-m500 amp to power my 10" type r sub.

Can a step down converter be used with the stock amp in place? My plan is to get the step down converter, tap the speakers, run the RCA out from the step down to the MRP-m500 and finally connect to the type r.

I am wondering if this is the correct way to wire a sub with factory touch screen head unit and factory upgraded audio.

talonknowsbest

Member - Posts: 8

Joined: October 26, 2011

Location: Texas, United States

Posted: October 26, 2011 at 11:56 AM / IP Logged

you can hook up the line out converter behind the radio and tap into speaker wirees or tap into the speaker wires at the amp doesnt matter if it before or after the amp

Search for other posts by talonknowsbest

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2011 ram amp wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.