the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

stereo, 2002 chrysler sebring


Post ReplyPost New Topic
< Prev Topic Next Topic >
big whitey 
Member - Posts: 4
Member spacespace
Joined: October 28, 2011
Location: Ontario, Canada
Posted: October 28, 2011 at 8:47 PM / IP Logged  

Hey all,

I just "installed" a stereo in a car for a friend. He has a 2002 Chrysler Sebring. Of course I was dumb and didnt disconnect the battery before I did the install. Anyway now that the stereo is installed.. correctly I think (hard to get a proper diagram.. until I found this site) and his trunk release, power locks and stereo dont work. Does anyone have any suggestions of what I can do to fix this??

Thanks

blanx218 
Silver - Posts: 654
Silver spacespace
Joined: September 23, 2008
Location: Pennsylvania, United States
Posted: October 28, 2011 at 10:34 PM / IP Logged  
check all fuses. there should be 2 fuse boxes in the car one on the driver side kick panel and one under the hood.
big whitey 
Member - Posts: 4
Member spacespace
Joined: October 28, 2011
Location: Ontario, Canada
Posted: October 29, 2011 at 7:01 AM / IP Logged  
all the fuses in the kick box seem to be fine, the only ones we werent able to check were the ones under the hood for the ACC as we had no spare fuses
big whitey 
Member - Posts: 4
Member spacespace
Joined: October 28, 2011
Location: Ontario, Canada
Posted: October 29, 2011 at 10:05 AM / IP Logged  
What fuses should he be checking, I am trying to do this over text message with him now. And am not familiar with this car. I already looked at the radio fuse and it is fine.
big whitey 
Member - Posts: 4
Member spacespace
Joined: October 28, 2011
Location: Ontario, Canada
Posted: October 29, 2011 at 10:34 AM / IP Logged  

There were also 3 wires left over coming from the car... however every wire on the harness was used other than the power control / antenna wire, mute wire for bluetooth I assume and ant connection

buddholly 
Copper - Posts: 244
Copper spacespace
Joined: August 24, 2006
Location: United States
Posted: October 29, 2011 at 11:39 AM / IP Logged  

Infinity system will have two 10 amp fuses under the hood, #17 and #18

Without Infinity there will be two 10 amp fuses in the drivers end cap, #14 and #5


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer