the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

07 silverado classic


Post ReplyPost New Topic
< Prev Topic Next Topic >
fastback4 
Member - Posts: 7
Member spacespace
Joined: January 22, 2013
Location: Kentucky, United States
Posted: January 22, 2013 at 12:15 PM / IP Logged  
Anyone tell me what size front and rear speakers my 07 Silverado Classic has and how to remove the door panels. Seems my kids are to busy to help ole dad....
shortcircuit161 
Silver - Posts: 556
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: August 29, 2010
Location: United States
Posted: January 22, 2013 at 1:15 PM / IP Logged  
per metraonline.com
Vehicle Speakers
Location     Size     Depth
Front 1     6.5     4
Front Tweeters     1     1
Rear 1     4X6     2.5
How to remove the door panels, I would Google it, I'm sure there are tons of sites and videos showing how. 07 silverado classic -- posted image.
fastback4 
Member - Posts: 7
Member spacespace
Joined: January 22, 2013
Location: Kentucky, United States
Posted: January 22, 2013 at 1:35 PM / IP Logged  
Thank you and I will do that
soundnsecurity 
Gold - Posts: 2,711
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 10, 2008
Location: Louisiana, United States
Posted: January 22, 2013 at 4:27 PM / IP Logged  
the classic doors are easy to pull off. you need a pick tool, a 7mm socket and maybe a 10mm socket.
the switch panel can be pried up from the bottom. unplug the switches and there could be a 7mm screw that is visible once the switch panel is off.
there is a cover around the door handle that you can just pry off from the side facing the front of the truck. once that cover is off there will be another 7mm screw that you can take out.
there might be another 7mm hiding in the corner of the pull handle that is on top of the door handle.
the triangle panel at the front corner of the door just pops off when you pull it but be careful because it can break. it is held on by two metal clips and might be a little hard to take off if it has never been taken off.
there might be another 7mm at the very bottom of the door.
once all the screws are out, the door will come off with an upward pull. dont pull outward because you will bend the plastic hooks that hold the door on.
if you have the little light in the corner of the door then you need to unplug that light after you have the door panel mostly off and you have access to the back of the light.
if you have the full four door truck then the back doors should be almost exactly the same to take off. look for screws in similar locations as the front door and lift upward to get the panel off of the door.
fastback4 
Member - Posts: 7
Member spacespace
Joined: January 22, 2013
Location: Kentucky, United States
Posted: January 22, 2013 at 7:26 PM / IP Logged  
Thanks for the detailed answer. Hope I can help others If I'm asked

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 12, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer