subwoofer enclosure

Home / the12volt's Install Bay / Car Audio / subwoofer enclosure (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hiranjoy

Member - Posts: 3

Joined: April 08, 2013

Location: New York, India

Posted: April 08, 2013 at 7:54 AM / IP Logged

I bought two Pioneer TS-W304R sub woofers,12" 300RMS each 1300Watts output total of 2600 watts.I want to make a wedged enclosure with slot port.Now am confused with the port size and length.can anybody help in this?

Hiran Joy

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: April 08, 2013 at 12:05 PM / IP Logged

The power rating on a subwoofer is the amount of input power it can handle, not the output power and by the way, the subs you purchased are rated at 300 watts each (the 1300 watt number is an instantaneous peak value.) I can recommend using an amplifier with output power no higher than 300 watts per sub.

As far as the proper size port, what tuning frequency are you trying for and what is the total size of your enclosure?

Support the12volt.com

Back to Top

dcucannon

Member - Posts: 1

Joined: April 10, 2013

Location: Utah, United States

Posted: April 10, 2013 at 7:11 PM / IP Logged

can you give us any measurements of the enclosure, or the space it will fit into?

-------------

Back to Top

hiranjoy

Member - Posts: 3

Joined: April 08, 2013

Location: New York, India

Posted: April 11, 2013 at 4:42 AM / IP Logged

port dimensions:

port diameter: 3 inch

i need a tuning frequency as 35.

Hiran Joy

Back to Top

hiranjoy

Member - Posts: 3

Joined: April 08, 2013

Location: New York, India

Posted: April 11, 2013 at 4:44 AM / IP Logged

Enclosure dimensions

width is 34 inches,

Height 1:20inches,

height2 : 12inches,

depth 18 inches.

Hiran Joy

Back to Top

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: April 11, 2013 at 2:07 PM / IP Logged

OK, so your dimensions are about 4.5 cuft gross, assuming you use 3/4" MDF. Subtracting for woofers and braces (you are using braces?) let's estimate a 4.2 cuft net. With a 3" round port to tune to 35Hz, it needs to be 1.5 inches long.

https://www.the12volt.com/caraudio/boxcalcs.asp

Support the12volt.com

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

subwoofer enclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.