2 different wattage speakers

Home / the12volt's Install Bay / Car Audio / 2 different wattage speakers (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

goodies

Member - Posts: 1

Joined: May 27, 2013

Location: Arizona, United States

Posted: May 27, 2013 at 12:14 PM / IP Logged

I'm putting new speakers in my 97 Astro front speakers 6.5" 4ohm 75W RMS. Rear is where I have questions the rear doors get 6.5" 4 ohm 75W RMS, the pillars get 4" 4ohm 20W RMS. The factory wiring on doors & pillars is paralleled. The amp is 4 channel 100W at 2 ohm or 50W at 4ohm.

Is there a way I can connect them it so I won't blow the pillar speakers?

Back to Top

pts760

Copper - Posts: 403

Joined: December 11, 2009

Location: United States

Posted: June 06, 2013 at 12:50 PM / IP Logged

find some 4" seakers that are 50W RMS or cut the 4" hole out and put in another set of 6.5" speakers in the pillars.

I drink current, eat ohms, and bleed voltage

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2 different wattage speakers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.