hifonics brutus amp pioneer champ series

So Ive got a hifonics brutus series amp 2008d. 2000w mono block. Rms rating at 650x1at 4ohm 1300x1@ 2 ohm 2000x1 @ 1 ohm The subs I have are 2 12inch pioneer champ series subs 4 ohm dvs 400rms. Now what would be the best way to wire them up to the amp. Right now I have it set for 4 ohms but I was curious is there any possible way to wire the 2 subs down to 2 ohms into a monoblock amp. Ive looked and havent found anything .

I meant dvc

You can wire them at 4 ohm (paralleled coils, then series each speaker) or 1 ohm (parallel coils, then parallel each speaker). With what you have there is no way to go 2 ohms - you would need 4 ohm svc speakers to do that with a monoblock amp.Kevin Pierson