wiring amp and subs

Home / the12volt's Install Bay / Car Audio / wiring amp and subs (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

power_man

Member - Posts: 2

Joined: October 17, 2014

Location: Ontario, Canada

Posted: November 01, 2014 at 4:57 PM / IP Logged

Hello all, new hear. Think this is a simple question but wanted verification.

System specs:

2 Rockford Fosgate T2D212 subs

Rockford Fosgate T2500

2 HC2000 batteries

When I wired my subs I put the jumper wires on each of the subs one voice coil. Then I ran I set of wires from the amp to the other voice cool of one sub, the a set of wires from the first sub to the second sub. So the subs are wired in two ohms.

Hope that makes sense. In short I only have one set of wires going to the amp for two subs. 8ga wires.

Back to Top

power_man

Member - Posts: 2

Joined: October 17, 2014

Location: Ontario, Canada

Posted: November 01, 2014 at 5:01 PM / IP Logged

Vehicle info it asked for.

2006 Chev Optra hatch

2.0l

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring amp and subs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.