the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

choosing a pair of subwoofers


Post ReplyPost New Topic
< Prev Topic Next Topic >
the1unknown 
Member - Posts: 1
Member spacespace
Joined: December 14, 2015
Posted: December 14, 2015 at 11:20 AM / IP Logged Link to Post Post Reply Quote the1unknown
I have a Pioneer D8601 class D mono block amp. I plan on installing two 12's in a sealed enclosure. I want to have them wired down to 1 ohm so I can get my maximum 800 watts rms out of my amp. I'm looking at kicker compR 12 and the punch P3D4-12 but I'm not sure wich is better. I'm not dead set on either so if anyone has a better option I'm all ears. Just need to keep it $300 or less for the pair as I'm on a budget and let's face it @ 800 rms I'm not going to enter any spl comps. ty in advance.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer