2003 Pontiac Vibe - Please.

Home / the12volt's Install Bay / Car Audio / 2003 Pontiac Vibe - Please. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

robcarey

Member - Posts: 1

Joined: June 01, 2003

Location: Canada

Posted: June 01, 2003 at 3:06 PM / IP Logged

Hello Folks.

Would someone out there be able to help me? I am looking to install a Sirius Sattelite radio unit (Jensen Model) into a stock 2003 vibe radio unit. I believe I can just connect to the wites going into the stock radio but I am uncertian what wire is what. I would also like some ideas on the ground location. The Jenson unit will sit in the rear of the car, where is a goood ground under all that darn plastic? I believe the other ground can just hook into the head unit aswell.

I need Power, Memmory (alway's on) and ground.

This stereo is just the standard model I believe - My sisters car.

Please help..

luxuryrules

Copper - Posts: 102

Joined: March 17, 2003

Location: United States

Posted: June 01, 2003 at 4:42 PM / IP Logged

When you look at the wires behind your radio they are color coded. Somebody correct me if I'm wrong, but power is the red wire, memory is yellow, and ground is black. Just run wires up under your door panels to the radio. Looking for a ground in the back of the car, I don't know my way around the Vibe so I can't help you. I'll just say that, back when my car was made, there was this stuff called metal. I guess that's kind of outdated because nobody seems to use it anymore...

esmith69

Gold - Posts: 1,511

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 26, 2002

Location: United States

Posted: June 01, 2003 at 5:07 PM / IP Logged

The colors of the factory wires most likely do NOT follow EIA guidelines and therefore they're not necessarily gonna be red, yellow, and black. If you take a look at this harness and compare it to your plug you will see which pins correspond to which factory wires, and can make your connections that way. Also remember when doing fm modulators in GM cars you need two antenna adapters: GM10 (Motorola M to OEM antenna F) and GM20 (OEM M to Motorola antenna F).

As far as grounding the tuner, I don't really remember much about the rear of this vehicle and can only suggest that you just pull back any interior panels that are in the way, until you find a spot of bare metal or metal that can have its paint scraped down to bare metal.

Ethan

-----

"Patience, persistence, and perspiration make an unbeatable combination for success"

Donate to the12volt.com

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: June 01, 2003 at 6:58 PM / IP Logged

The color codes of the factory wiring is unimportant, because it is always poor practice to connect to wiring without testing it first.

All you have to do is use your meter or test light on each of the wires there until you find the two wires that do what you want.

Also, there are some wires at the radio that will test as ground, but they'll actually be parking light wires....if you find a ground there, turn the parking lights on, and run the dash dimmer up and down, and make sure it is STILL a ground.

If the radio's metal bracket screws into a solid metal part of the car, you could also put a ring terminal on your Sirius unit's ground wire, and attach it to one of the screws on the bracket.

esmith69

Gold - Posts: 1,511

Joined: November 26, 2002

Location: United States

Posted: June 01, 2003 at 7:36 PM / IP Logged

Thanks Chris for the clarification, and I completely agree with you! I should have made a point of insisting on testing the wires.

Ethan

-----

"Patience, persistence, and perspiration make an unbeatable combination for success"

Donate to the12volt.com

luxuryrules

Copper - Posts: 102

Joined: March 17, 2003

Location: United States

Posted: June 01, 2003 at 8:00 PM / IP Logged

Oops, my mistake. Didn't mean to cause any confusion, Rob you're better off listening to esmith on this one.

Sorry all!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 Pontiac Vibe - Please.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.