I need a stable amp at 2.67 ohm

Home / the12volt's Install Bay / Car Audio / I need a stable amp at 2.67 ohm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

BrettG

Member - Posts: 18

Joined: February 13, 2003

Location: United States

Posted: July 30, 2003 at 9:13 PM / IP Logged

Hi, I am running 3 Rockford 10" HE2's with 400watts RMS each and I can only wire them at 2.67 ohm OR 0.67 ohm loads. I am looking for a amp that will be able to power these, PLEASE HELP ASAP!!!

Maxst

Silver - Posts: 866

Joined: June 06, 2003

Location: United States

Posted: July 30, 2003 at 9:30 PM / IP Logged

get one of the many 2ohm stable amps....they all mostly are.

I need quality equipment, feel free to donate.

esmith69

Gold - Posts: 1,511

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 26, 2002

Location: United States

Posted: July 30, 2003 at 9:57 PM / IP Logged

Most mono amps are 2 ohm stable but most 2-channel amplifiers are only 4 ohm stable when you run a mono/bridged load to them.

If you can find one, the JBL BP1200.1 is an amazing subwoofer amp and they've been on ebay NEW for under $300. You will not find a better amp for the money, guaranteed. BTW they are stable down to 1 ohms, but their max RMS output (1200 watts) is at 1 or 2 ohms. So you'll probably get around 1100 watts total so maybe about 350 RMS per sub.

Ethan

-----

"Patience, persistence, and perspiration make an unbeatable combination for success"

Donate to the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

I need a stable amp at 2.67 ohm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.