1990 plymoth voyager van
Topic Closed)
Members
Search
Register
Login
Posted: September 11, 2003 at 9:22 PM / IP Logged
Posted: September 12, 2003 at 10:15 AM / IP Logged
The 4 wires on the speakers you mentioned, if two of them are thicker than the other 2 then those are probably the power and ground. The smaller ones are probably the speaker connections. Do you not have a wiring harness in it all? If not, I would suggest replacing it with an OEM replacement harness. Then all you would need is an adapter harness for the head unit. But if you want to just wire it in you could use this diagram for the pin out locations. You also may need the simplified diagram as well. Hope that helps.
Duane... If you think you're confused, imagine how you feel.Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
