jbl 300.1 amp settings

Home / the12volt's Install Bay / Car Audio / jbl 300.1 amp settings (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Ishinc

Copper - Posts: 109

Joined: May 22, 2002

Posted: December 11, 2003 at 5:16 PM / IP Logged

hey everybody!

i just got my sub and amp installed. it's a jbl 300.1. this may be a dumb question but what does distortion sounds like? is it like buzzing when the bass hits? also how do i correct set the input, low-pass filter, and the bass boost?

any good songs i should play while setting? hehe

thanks!

Back to Top

HamiltonAudio

Silver - Posts: 278

Joined: October 15, 2003

Posted: December 16, 2003 at 8:41 PM / IP Logged

the input settings is quite easy...set bass/treble to flat. disconnect all other speakers. now play your favourite song (something bassy) and set your decks volume to 3/4 or a little less. now start turning the gain up until you begin to hear distorion...be close to the sub for this, as its hard to tell from far away.

when it begins to distort, turn the gain down just enough for the distortion to go away and ur set. the crossover can be played with from 60 to 120 hz, depending on what sounds good in the car. bass boost should be turned off (imho)

b

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

jbl 300.1 amp settings

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.