the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

98 honda accord coupe


Post ReplyPost New Topic
< Prev Topic Next Topic >
nc_accord 
Member - Posts: 8
Member spacespace
Joined: July 28, 2002
Location: United States
Posted: July 28, 2002 at 1:48 PM / IP Logged  
I removed a factory cassette player out of my car and replaced it with kenwood cd player. In the process blowing a fuse that i later replaced.Now my dash lights do not work also I have two illumination wires that I have nothing to connect to them.all the audio places that I have been to say that it is connected correctly. I need some helP!
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: July 28, 2002 at 1:52 PM / IP Logged  

Check the fuse at the side of the car. There are several fuses for the light circuit, make sure you check them all as well as check inside the engine bay for the other fuses. The illumination wires do not need to be hooked up ( not necessary ) unless you want to have the dimmer attached to the Kenwood.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
nc_accord 
Member - Posts: 8
Member spacespace
Joined: July 28, 2002
Location: United States
Posted: July 29, 2002 at 8:18 AM / IP Logged  
I've checked my fuses and had to replace the interior lights one but nothing else is blown.but I can check again.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: July 29, 2002 at 8:31 AM / IP Logged  

Make sure that the unused wires are taped on the ends SEPARATELY so that they do not ground out on each other or on the frame of the car. Also, make sure that there is not any broken or frayed wires in the back of the deck. Sometimes when installers put the player back into the dash they force it in causing a snagged wire or it ends up pinching the wire casuing a short.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
nc_accord 
Member - Posts: 8
Member spacespace
Joined: July 28, 2002
Location: United States
Posted: July 29, 2002 at 8:45 AM / IP Logged  

I'll have to tape the end of the orange wire and the orange and white one. What would happen if they were to touch or ground out.

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: July 29, 2002 at 10:37 AM / IP Logged  

If the wires touch ground the lights will go out. The fuse will blow or worse, the display on the unit will not work, but everything else will.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
nc_accord 
Member - Posts: 8
Member spacespace
Joined: July 28, 2002
Location: United States
Posted: July 29, 2002 at 1:04 PM / IP Logged  

So now my question is how do I fix this? if I've already replaced the fuses and as many bulbs as I can find. The radio unit lights up. The clock and the mileage thing light up also, until I turn the headlights on, but my speedometer, air conditioning buttons and such do not. I  am trying to get these to light up again. Someone told me that I may need a new light switch for my steering column but I don't want to waste my money on that and its not the problem.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer