Help with amp choices

Home / the12volt's Install Bay / Car Audio / Help with amp choices (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Kaotic

Member - Posts: 3

Joined: November 12, 2003

Location: Canada

Posted: December 29, 2003 at 11:25 PM / IP Logged

Hey guys...I have a 1996 Impala SS and i just finished the rear trunk layout in fiberglass which holds 2 air tanks for the air ride on each side, 2 fans in the rear, an enclosure built to suit the floor of the trunk w/ 2 12" Swiss Audio SWC's firing into the cab of the car through the rear deck, the car is set up at the moment to run 2 amps in a false floor with a plexiglass Swiss Audio logo in the recess and a capacitor on one side and distribution block on the other. now heres my question. Given that i am running 2 amps (1 for subs and 1 for rear 6x9's and front seperates) what are my best options based on Swiss's amps. Reason I ask is because I am new to Swiss audios line as well as high end stereos. I am a body man/fabricator and i work at a custom shop. Th efiberglass install was a joke to do but when it comes to something as easy as choosing Amps...Im in a daza

www.swissaudioinc.com

sonicsound

Copper - Posts: 100

Joined: July 08, 2003

Location: Wisconsin, United States

Posted: December 31, 2003 at 8:09 PM / IP Logged

Use an SDX series for the subs if they are dual 4 ohm voice coil subs and use the smr6004 for your 6x9's and components

Sonic

Pioneer AVH-P4000DVD

Zapco 360.4

Zapco 500.1

Zapco SP-4SL Processor

Two JL 10 W3v3d2

Alumapro 15 Farad Cap

Kaotic

Member - Posts: 3

Joined: November 12, 2003

Location: Canada

Posted: January 01, 2004 at 2:22 PM / IP Logged

sonicsound wrote:

Use an SDX series for the subs if they are dual 4 ohm voice coil subs and use the smr6004 for your 6x9's and components

Nice Call!!!!

Thats pretty much exactly what i had priced out as my No. 1 Option..Cool

Thanx

Kaotic

Member - Posts: 3

Joined: November 12, 2003

Location: Canada

Posted: January 01, 2004 at 2:29 PM / IP Logged

sonicsound wrote:

Use an SDX series for the subs if they are dual 4 ohm voice coil subs and use the smr6004 for your 6x9's and components

http://www.swissaudioinc.com/woofers/swl.html

The subs are dual 4Ohm voice coil 12", I was looking into the SDX1000 amplifier. THe only catch to any of this is that i built the enclosure to house the 2 subs seperately with a wall in the middle of the enclosure in case one sub should fail the other isnt trying to push twice the volume. Now will there be a problem with runing a 1 channel 350Watt setup in this configuration or should i run a stereo setup with a 6004 running subs and another for fronts and decklid.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Help with amp choices

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.