Bad LOC?

Home / the12volt's Install Bay / Car Audio / Bad LOC? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

forbidden

Platinum - Posts: 5,352

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: January 05, 2004 at 8:20 PM / IP Logged

Have not got time to solve this one myself, it's the chicks bday, so my rookie is trying to solve this one. 2004 Chev PU xcab with delco bose system. Adding an amp / sub system. The sub system works fine with an aftermarket head powering it, this was done to test the system. He has tried 2 amplifiers (with built in LOC) and 2 outboard LOC. When hooked up to the stock head, the subs give a steady beat - beat - beat along with the tunes, he tied into the rear speaker leads. All wiring methods he has tried has given him the same results. Alpine amp and scosche hi - lo adaptor FAI3, I'm outta here right now, any replies for Geoff would be appreciated.

Top Secret, I can tell you but then my wife will kill me.

Back to Top

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: January 05, 2004 at 10:00 PM / IP Logged

Where did he tag the LOC at? If he did it at the deck then that would be the problem. You need to tag them after the amplifier. You can get them in the front kickpanels in the harness going to the door for the fronts.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Blown vette

Member - Posts: 2

Joined: December 17, 2003

Location: United States

Posted: January 06, 2004 at 12:40 AM / IP Logged

I'm about to do the same to my truck. You wouln't happen to know the colors of the rear sreaker leads right off hand would you? If you do please post them for me. Thank you very much.

Back to Top

evolutionoftym

Member - Posts: 39

Joined: January 06, 2004

Location: United States

Posted: January 07, 2004 at 4:17 AM / IP Logged

just find the amp and you'll see wires twisted together in 2's these are the output wires going to the amp.....those are what you'll need to tag the LOC into

Back to Top

Search for other posts by evolutionoftym

forbidden

Platinum - Posts: 5,352

Joined: November 01, 2003

Location: Alberta, Canada

Posted: January 07, 2004 at 2:58 PM / IP Logged

LOC was added after the amp, continuity was checked, no wires going to ground, speaker was attached to the new leads, worked fine, just that infernal noise whenever we use the LOC, either built into the amp or separate.

Top Secret, I can tell you but then my wife will kill me.

Back to Top

docka

Member - Posts: 5

Joined: January 05, 2004

Posted: January 08, 2004 at 7:42 PM / IP Logged

i just gotta ask what is LOC??

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Bad LOC?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.