kenwood harness pinout

Home / the12volt's Install Bay / Car Audio / kenwood harness pinout (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pbclay

Member - Posts: 1

Joined: April 16, 2003

Posted: January 21, 2004 at 9:00 PM / IP Logged

i have a kenwood kdc 516s head unit and the harness clip from an alpine that will fit it but i need the pinout for the kenwood to make it work. please help. thanks in advance,

pbclay

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: January 22, 2004 at 9:32 PM / IP Logged

Don't have the pinout with me, but if you open the deck and flip over the board, they are usual marked at the solder end of the connector. But why take the chance, you can buy the correct harness for $10-15 dollars, and if you or someelse rewires the deck in the future you won't have problems.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kenwood harness pinout

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.