bridged or stereo?

hows it. i need to know if i should bridge this amp to get the most bang out of it. it is an audiobahn a275hcq high current amp. also i have 2 aw125t subs the amp runs 75 watts rms the subs say 400 rms. so if i do bridge the amp should i wire the subs in series or paralell.thanks alot. love the flames.apair of aw1251t subs 75 watt rms flame amp eq/linedriver clarion h.u.the rest is temporary untill i can afford the rest of the system.

I had a pair of AW1251T's, they're DVC subs and the A275HCQ amp is 2 channel right? Assuming the Amp is 2-Ohm stable (most audiobahns are...) I'd wire each sub in parallel between the 2 voic coils and run one sub off each channel, if the amps rated at 2x75 @ 4-Ohm it will put out about 100-150 Watts per channel at 2-Ohm which will push those subs fairly well.

hey cool i appriciate it a lot.love the flames.apair of aw1251t subs 75 watt rms flame amp eq/linedriver clarion h.u.the rest is temporary untill i can afford the rest of the system.