the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

rear speakers 89 lesabre


Post ReplyPost New Topic
< Prev Topic Next Topic >
makaveliwi 
Member - Posts: 19
Member spacespace
Joined: February 27, 2004
Location: United States
Posted: March 09, 2004 at 1:57 PM / IP Logged  
I have an 1989 Lesabre sedan 4 door. Originally there were 6x9s hanging from the rear deck. now i want to drop the speakers in from the top but they are too big for the hole. i don't want to cut the holes any bigger if i don't have too. are there any kind of brackets available for this. I also would like to have them angle towards the front of the car. sort of like a triangular bracket. would i have too make this or is something available?
milwaukee walt
mobile1 
Silver - Posts: 479
Silver spacespace
Joined: February 23, 2004
Location: United States
Posted: March 10, 2004 at 12:07 AM / IP Logged  
never seen it. looks like you're in for some fabrication

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 11, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer