Would this sub and amp work together

Home / the12volt's Install Bay / Car Audio / Would this sub and amp work together (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bobjesus

Member - Posts: 1

Joined: March 12, 2004

Posted: March 12, 2004 at 4:01 PM / IP Logged

Sub: http://www.sounddomain.com/shop/item.pl?sku=KIC01C10VR4

Amp: http://www.energenix.com/profile-600sx.html

Couldnt I just put the amp in stero then wire the left and right channels to the seperate voice coils? I'm a newbie

harvey1959

Copper - Posts: 94

Joined: January 31, 2004

Location: United States

Posted: March 12, 2004 at 8:00 PM / IP Logged

Yes you can. If you wire the voice coils in parallel to the amp it will give you a 2 ohm load to the amp. In this case 225 watts per coil. If you wire the sub in series then you get an 8 Ohm load or probably about 75 watts per coil but it would work. Hope this helps.

Harv

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Would this sub and amp work together

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.