the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

power wire under car


Post ReplyPost New Topic
< Prev Topic Next Topic >
bp_viper 
Copper - Posts: 57
Copper spacespace
Joined: March 09, 2004
Location: United States
Posted: March 19, 2004 at 8:52 PM / IP Logged  
would it be alright to run the power wire from the battery to the rear of my s10 blazer under the car? if so would it be best to run along the frame rails, or through small pvc pipe to protect it. i was thinking that would be easiest so the wire wouldnt have to go under the carpet. thanks for any advice. brent
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: March 19, 2004 at 8:55 PM / IP Logged  
Use the PVC pipe idea so the wire will be protected.
Ketel22 
Silver - Posts: 976
Silver spacespace
Joined: August 23, 2003
Location: United States
Posted: March 19, 2004 at 8:56 PM / IP Logged  
if you want to run it under the body, run it along the frame rails with some 1/2"cpvc piping, assuming your using 4ga wire.
Quad L Handyman services
superstreet786 
Silver - Posts: 339
Silver spacespace
Joined: August 12, 2003
Location: United States
Posted: March 19, 2004 at 9:13 PM / IP Logged  
honestly id go through the firewall, you wont risk as much and its easier to work on... just my opinion
---- 1996 Chevy S10 ----
1 Lightning Audio S2.600.2 Amp
2 Lightning Audio 12" Subs
1 Lightning Audio 1 Farad Cap
amickracing 
Member - Posts: 19
Member spacespace
Joined: February 08, 2004
Location: United States
Posted: March 19, 2004 at 10:02 PM / IP Logged  
Going inside will probably be the safer idea, but sometimes it's not always the only choice. If I were to run wiring outside of the car I'd definately use welding wire (since it's basically designed for that, plus for me it's cheaper than fancy wire). And also check out the flexible conduit most home improvement stores have. It's a rubber/plastic kind of stuff and isn't too expensive.
markcars 
Silver - Posts: 662
Silver spacespace
Joined: December 11, 2002
Location: New York, United States
Posted: March 19, 2004 at 10:02 PM / IP Logged  
Under the car would be my last option if I had absolutely no other choice. I thought of it when I had a tough time once, but somehow succeeded to find a spot to drill without piercing into any other wires or pipes etc (with a lot of trouble) to drill a hole in the firewall. Going under the car is not the safest idea since you get water, mud and all the elements not to mention stones etc might hit the wires. If you put it in real good PVC then you're better off than nothing, but not as good and safe as it would be if it were inside the vehicle. Anyways, you are the final judge.
customsuburb 
Gold - Posts: 1,813
Gold spacespace
Joined: January 17, 2004
Location: United States
Posted: March 19, 2004 at 10:39 PM / IP Logged  
Definitely run the power wire inside the vehicle through the fire wall. You won't have to worry about the elements like markcars said^.
sonicsound 
Copper - Posts: 100
Copper spacespace
Joined: July 08, 2003
Location: Wisconsin, United States
Posted: March 20, 2004 at 12:27 PM / IP Logged  
Plus if it's only 4ga, it shouldn't be that bad to go through the firewall and under the side steps by the doors.  If you were doing 1/0 ga then I would recomend going under the car.  I'm running 2ga inside my car and I have had no problem.  I've even run 1/0ga through a car and not under, you just have to do some extra planning in running the wire.  Hope that helps...
Sonic
Pioneer AVH-P4000DVD
Zapco 360.4
Zapco 500.1
Zapco SP-4SL Processor
Two JL 10 W3v3d2
Alumapro 15 Farad Cap
bryceyaworsky 
Copper - Posts: 152
Copper spacespace
Joined: August 03, 2003
Location: Canada
Posted: March 20, 2004 at 2:29 PM / IP Logged  
Have you looked at http://www.knukonceptz.com?  Aside from having ridiculous prices and high-end cables (I know I sound like a commercial, but believe me on this one), they sell flat cable as well.  I ran their 1/0 and 2 gauge flat through my car and you can't feel where I ran it.  Check it out.
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: March 20, 2004 at 3:39 PM / IP Logged  
Lightning makes flat power cable as well
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer