amplifier keeps cutting out

Home / the12volt's Install Bay / Car Audio / amplifier keeps cutting out (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

duttyface74

Member - Posts: 4

Joined: March 19, 2002

Location: United States

Posted: August 18, 2002 at 7:20 PM / IP Logged

I HAVE KENWOOD KAC-929 AMPS WHICH IS 1000 WATTS 2 CHANNEL AND I HAVE A AUDIOBAHN WITH TWO 10 " SPEAKER SUBWOOFER ENCLOSURE. AFTER PLAYING FOR ABOUT 10 MIN. IT CUTS IN AND OUT..

CAN ANYONE HELP ME OUT HERE ...PLEASE....THANK YOU

JellyNutz

Copper - Posts: 85

Joined: August 18, 2002

Location: United States

Posted: August 18, 2002 at 8:23 PM / IP Logged

At the first glance I'd say you've wired your subs at too low of an impedence. Check to make sure your not going below the manufacturers spec's. Also make sure the amps gain is adjusted so the speakers do not clip and make sure you have a very heavy gauge power wire (at least 2-4 gauge depending on the run for a 1000 watt amp). If none of this solves your problem check for a loose remote wire..

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amplifier keeps cutting out

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.