Modified Rockford Fosgate BD Amps

Hey, heard something I never heard before. What is  amodified fosgate bd1000 and bd1500. From what I have gathered, Some cap's are removed from the inside, stabalizing the respective amp for 1ohm loads?

Anyone reading these threads knows that I dont place much value on my RF amps due to the way they have treated me, but Actually getting my two bd1000's to be able to handle a 1.34 ohm load while "bridged" would make quite a diffrence to me.

I was offered two RF X6a amps from the dealer I bought the two 1000's from, but now he is telling me that 2 modified bd1500's or even three unmoded would run my (3) RF 3112 subs.

I'm uneducated on the modded rf bd series, someone please educate me.

"hey john, now the difference between a modified bd1500 and a regular one, is there is no protection circuitry which means you can it at .5 ohm without worrying about shutdown, and at .75 ohms this amp puts out 3200watts x1"

Thats what I got from someone I'm talking to that also modifies the 3112 cones and spyders to make the 3112's the Team RF competition version (guess the new mods + the 3112 is what the factory gives the team). Makes the 3112 a dual 1.4 ohm sub with dual spyders. "foam surroud and the cone is much lighter".

Before I even think about decreaseing my ohm load (since Im already planing to run my box at 3ohms with amps stated to not run at less than 4) I want to find out about bypassign the protection circuitry and see if I actually need to with the threee 3112 subs...

Anyonw know how to do the bypass mod?