98/99 navigator factory amp

Home / the12volt's Install Bay / Car Audio / 98/99 navigator factory amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kwalls420

Member - Posts: 2

Joined: January 04, 2004

Location: United States

Posted: March 27, 2004 at 2:29 PM / IP Logged

where is the factory amp located in a 98/99 navigator, we took the back right panel off in the rear and the only amp there was for the factory sub... any ideas would be appreicated

mobile1

Silver - Posts: 479

Joined: February 23, 2004

Location: United States

Posted: March 27, 2004 at 8:43 PM / IP Logged

check the center councole. If it has the mach audio system, there will be an amp in the back panel and another one below the dash accessable from the center councole. (kind of a pain to get to)

Metra Tech

Copper - Posts: 125

Joined: October 21, 2003

Location: United States

Posted: March 28, 2004 at 10:28 AM / IP Logged

98's and 99's are totally different different. 98's have an amp below the dash in the center and a bass amp in the rear by the sub like mobile1 mentioned, but 99's the radio powers the highs and bass amp remains in the rear to power the sub. What are you installing in the vehicle?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98/99 navigator factory amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.