spl & sq

Since CV was purchased by Stanton (the turntable folks) the assembly of their loudspeakers has moved out of the US and their quality has gone down.  But the V-Max is still a decent low-cost loudspeaker. 

Put each one in a sealed 1.25 CUFT enclosure.  Your speakers are rated at 300 watts RMS and your amp produces 750 watts into 4 ohms.  What's the impedence on your speakers? (DVC? SVC? which version do you have?)

DVC, great, but at what impedence?  DVC 4-ohm or DVC 2-ohm???

To hook these to your 1501bd amp, you'll need to run two in series (300W + 300W) so they can handle the power output of that amp.  You'll want to run them at 4 ohms each, in series for 8 ohms in a pair.  Then parallel the two pairs to the amp for 4 ohm load on the amp.  That is, if you subs CAN be wired at 4-ohms.

Give me the ratings on your sub's voice coils!

Model: ALUM12Q

1000 Watts RMS / 2000 Watts MAX

Huge 120 oz Double Stacked Strontium Magnets!

Precision Heavy Duty Cast Basket

Spun Aluminum Cone

Dual 3" ASV 4 Layer 6 Ohm Voice Coils

For 3 or 12 Ohm Operation

1.75" Rubber EPDM Surround

Freq. Response: 18 Hz - 500 Hz

Efficiency: 96.4 dB

Multi-Connection Lug Lock Terminals

Mounting Depth 5 5/8"; Hole 11 1/8"; Outer Diameter 12 3/4"

You are bidding on a PAIR of subwoofers