96 chrysler town &country

Home / the12volt's Install Bay / Car Audio / 96 chrysler town &country (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Eraudio

Member - Posts: 1

Joined: March 12, 2004

Location: Uruguay

Posted: March 29, 2004 at 4:38 PM / IP Logged

I can't get the door and rear speakers to work. what do i do? please help

er audio systems

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: March 29, 2004 at 9:05 PM / IP Logged

There may be an amp for them. There are usually two ground connections at the radio. One is a ground strap and one is a wire with a female spade on it. The wire one must be grounded to the strap and the radio. The radio's power antenna wire must be hooked up (GREEN/ red) to trigger the amp. Check all fuses in the vehicle.

sparky

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

96 chrysler town &country

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.