enough power

Home / the12volt's Install Bay / Car Audio / enough power (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bitis

Member - Posts: 3

Joined: October 06, 2003

Location: United States

Posted: March 31, 2004 at 7:04 PM / IP Logged

I recently was given a power acoustic lt-series amp. which is model#lt9802 which is rated at 2x220@4ohms and 2x280@2ohms.i also recieved three power acoustic subs model fbx10 which are dual 4ohm voice coils. rated at 600rms and 1200 peak. my question is will the amp supply enough power for all three and what is the best way to wire them for best sound reproduction.this is all in an extended cab s-10 any info would be appreciated. by the way i recieved all of this from my friend and all is still in boxes.

bitis

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: March 31, 2004 at 9:27 PM / IP Logged

Just use two and keep the third for a backup. Going by your info, wire them at 2 ohms each---POS to POS and NEG to NEG on each speaker (parallel). Get info from the manufacturer for the proper size enclosure for each one. Connect one to each channel of the amp for a 2 ohm stereo load.

Nice friend,huh?

Clean Install

Silver - Posts: 446

Joined: January 03, 2004

Location: United States

Posted: March 31, 2004 at 9:32 PM / IP Logged

actually you will want to wire them like so for a 4 ohm load: enough power -- posted image.

If we learn from each success and

each failure, then we can improve ourselves

superstreet786

Silver - Posts: 339

Joined: August 12, 2003

Location: United States

Posted: April 01, 2004 at 4:20 PM / IP Logged

nice pic Clean Install :)

---- 1996 Chevy S10 ----

1 Lightning Audio S2.600.2 Amp

2 Lightning Audio 12" Subs

1 Lightning Audio 1 Farad Cap

Search for other posts by superstreet786

Clean Install

Silver - Posts: 446

Joined: January 03, 2004

Location: United States

Posted: April 01, 2004 at 8:10 PM / IP Logged

thanks

If we learn from each success and

each failure, then we can improve ourselves

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

enough power

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.