the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

window rattling


Post ReplyPost New Topic
< Prev Topic Next Topic >
flatulatta 
Silver - Posts: 356
Silver spacespace
Joined: August 28, 2003
Location: United States
Posted: April 13, 2004 at 10:03 AM / IP Logged  
i have a 96explorer and after installing my 3rd sub(s) in this car my back window is starting to rattle real bad anyone have a solution to this??? im pretty sure dynamat is out of the question so any advice would be lovely
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: April 13, 2004 at 10:46 AM / IP Logged  
Is the window in a door?  I sugegst you disassemble the door and see if you can improve the mounting system.  Most window slides have padding or rubber on them.  If you don't care if the window goes up and down anymore, you could always seal it to the door frame with clear RTV.  If you're talking about the rear windscreen, then you have a problem than will require either lowering your SPL or getting the windscreen remounted professionally.
Support the12volt.com
flatulatta 
Silver - Posts: 356
Silver spacespace
Joined: August 28, 2003
Location: United States
Posted: April 13, 2004 at 10:51 AM / IP Logged  
yea its the window in the door..... it prob does need to be remounted .... whats a windscreen?
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: April 13, 2004 at 10:58 AM / IP Logged  
Sorry, windscreen = windshield.
Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer