Problems with Power Windows after new HU

Home / the12volt's Install Bay / Car Audio / Problems with Power Windows after new HU (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Jimlincoln

Member - Posts: 3

Joined: April 15, 2004

Posted: April 15, 2004 at 6:35 PM / IP Logged

I have a 93 Lincoln Continental. It had an aftermarket radio in it. I replaced it with a better one. Before I replaced it, the power windows and moonroof worked fine. Now after switching it, they don't work. Also the trunk release button does not work. I checked for any poped fuses and for anything I might of accidentally disconnected. But didn't find anything wrong. I'd hate to have to bring it somewhere to get it fixed. Any ideas? Oh I also connected the power antenna to my remote connection on my radio. Its a Pioneer DEH-P6400, before that it was an Alpine Tape Deck. My e-mail is jbayley2003@yahoo.com if anyone can help me.

Thanks ahead of time,

Jim

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 15, 2004 at 7:39 PM / IP Logged

Does the radio work?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Jimlincoln

Member - Posts: 3

Joined: April 15, 2004

Posted: April 16, 2004 at 6:50 AM / IP Logged

yes. the radio works fine. the power locks work as well. its weird. I did have 2 wires that were not connected on the wire harness i used. One was for the illumination and i think the illumination ground. there wasn't a hook up on the clip for the radio.

Back to Top

Jimlincoln

Member - Posts: 3

Joined: April 15, 2004

Posted: April 16, 2004 at 7:18 AM / IP Logged

and as an added note, i took out the radio completely. tried it without the radio and it does not work. Problems with Power Windows after new HU -- posted image.

Problems with Power Windows after new HU -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Problems with Power Windows after new HU

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.