3 Subs; 2 configurations

Home / the12volt's Install Bay / Car Audio / 3 Subs; 2 configurations (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jstookie

Member - Posts: 3

Joined: April 08, 2004

Location: Georgia, United States

Posted: April 23, 2004 at 1:27 PM / IP Logged

What's up,

I have 3 subs, 2 Kicker VR 8's and 1Kicker VR 12. I want to be able to switch between the pair of 8's and the single 12 on one amp. The amp is a Kicker ZR 360.

Thanx

Confidence is not cookiness

kickerstang

Copper - Posts: 180

Joined: April 08, 2004

Location: United States

Posted: April 23, 2004 at 1:29 PM / IP Logged

you'll have to put each configuration on switches, so you can turn them on and off as you please. just put the switch in the speaker wires of each config.

what!?!?! you want some??

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: April 23, 2004 at 1:53 PM / IP Logged

Yea, speaker selector switch or relay.

Support the12volt.com

stevdart

Platinum - Posts: 5,816

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: April 23, 2004 at 2:27 PM / IP Logged

Is the final impedence the same for the two configurations? The 8's are at a 83 sensitivity and the 12 is at a 86.4 sensitivity. If I'm not mistaken, the 8's would need about twice the power as the 12. If your going to leave the amp gain at one setting during switches, then it should be set for the 12.

jstookie

Member - Posts: 3

Joined: April 08, 2004

Location: Georgia, United States

Posted: April 26, 2004 at 5:28 PM / IP Logged

How would I hook up this configuration to a relay or relays

Confidence is not cookiness

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

3 Subs; 2 configurations

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.