the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 ford f-150


Post ReplyPost New Topic
< Prev Topic Next Topic >
audiobassics 
Member - Posts: 1
Member spacespace
Joined: March 27, 2004
Location: United States
Posted: April 28, 2004 at 8:40 PM / IP Logged  
how to pull factory radio
forbidden 
Platinum - Posts: 5,352
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: November 01, 2003
Location: Alberta, Canada
Posted: April 28, 2004 at 9:06 PM / IP Logged  
Really hard, put both feet on dash, one on either side of radio. Insert claw end of Estwing 26oz framing hammer into tape or cd slot. Make sure you wear a jock, don't want to smack the family jewels, Pull damn hard and the dash should come with it. I have not seen one of these yet, I'll see if I can look at one tomorrow for you.
Top Secret, I can tell you but then my wife will kill me.
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: April 28, 2004 at 9:16 PM / IP Logged  
lol....that would work, but I'd use the Ford radio removal tools.
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
NowYaKnow 
Gold - Posts: 1,217
Gold spacespace
Joined: December 18, 2002
Posted: April 29, 2004 at 6:03 AM / IP Logged  
The new F150 doesn't use the ford removal tools from what I remember. Obviously the main panel surrounding the radio has to be removed. Start at the bottom of the panel and work your way up. If there are any screws holding that panel on, they are near the bottom of the panel. Worst thing is I just put an aftermarket radio in one of these last week and I'm really drawing a blank on the exact details. Let me know if you need to know any of the factory wiring colors. Metra has both a kit and plug out for this truck as well..
Mike

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer