Amp remote

Home / the12volt's Install Bay / Car Audio / Amp remote (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Birgir-Mustang

Member - Posts: 1

Joined: August 20, 2002

Location: Iceland

Posted: August 29, 2002 at 5:24 AM / IP Logged

can any one tell me the current of a remote wire to amp. The headunit is a Kenwood KDC-PS9080R.

thx

Birgir, Iceland

Search for other posts by Birgir-Mustang

monsoon-bad

Member - Posts: 20

Joined: July 17, 2002

Location: United States

Posted: August 29, 2002 at 5:58 AM / IP Logged

I believe the remote turn-on from a Kenwood h/u is 200Ma

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: August 29, 2002 at 10:14 AM / IP Logged

generally when adding more than one component to a head unit it is always a great idea to use a relay to make sure you dont burn out the head units remote lead circuit from over current draw. amps is ok without a relay but adding more tha this would require the use of one relay on the remote wire.

Search for other posts by mobiletoys2002

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Amp remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.