ohms

Home / the12volt's Install Bay / Car Audio / ohms (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

aaustinasdf

Member - Posts: 16

Joined: November 28, 2003

Location: United States

Posted: May 16, 2004 at 4:25 PM / IP Logged

do any of you know how to wire 3 4 ohm dvc to get 2 ohms?

Back to Top

crazyray

Member - Posts: 15

Joined: September 30, 2003

Location: United States

Posted: May 16, 2004 at 4:51 PM / IP Logged

Wire each driver's voice coils in series giving 8 ohms per driver. Then wire the three drivers in parallel yielding a net load of 2.66 ohms.

That's as close as it gets.

Back to Top

xTimx

Copper - Posts: 354

Joined: September 13, 2002

Location: Canada

Posted: May 16, 2004 at 5:46 PM / IP Logged

there ya go.

xTimx

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ohms

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.