hooking up 6-alpine sws1242d subs

Home / the12volt's Install Bay / Car Audio / hooking up 6-alpine sws1242d subs (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

fatdaddyjoe

Copper - Posts: 129

Joined: May 05, 2003

Location: United States

Posted: May 18, 2004 at 12:46 AM / IP Logged

what i need to know is what ohms would i have if i hooked up 6 dual 4 in series or parrallel or both what would i get ? wich way would be best to run to 1 amp

the louder the better !!!!!!

can you feel it ?????

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: May 18, 2004 at 8:18 AM / IP Logged

Wire all the speakers in series (8-ohms). Connect the six to the amp in parallel for a net load on the amp of 1.33 ohms. I suppose the amp is large enough to handle six woofers?

Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

hooking up 6-alpine sws1242d subs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.