the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

jensen A4000 amp


Post ReplyPost New Topic
< Prev Topic Next Topic >
Djmajicmark1 
Member - Posts: 21
Member spacespace
Joined: April 25, 2004
Location: United States
Posted: May 18, 2004 at 6:35 PM / IP Logged  

I know this isn't the best amp out there(or close to it for that matter. Im just wondering if anyone has any specs on it. other than 100X4, i have it set for 2 channel right now. Im looking to replace it but am wondering what the amp is putting out(other than sh*t for power), im talking watt wise and ohm load.

I can't find anything anywhere.

Mark

stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: May 18, 2004 at 9:30 PM / IP Logged  
I searched the web, too.  It looks like you've got one unique amp there.  Must have been an Argentine/Spanish model, and now discontinued.  Only found one, and it was on an Argentine auction as a liquidated model.  No specs shown.
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
phyle2 
Member - Posts: 3
Member spacespace
Joined: May 15, 2004
Location: United States
Posted: May 18, 2004 at 9:39 PM / IP Logged  
It's a Jensen, I'd say don't worry about technical info and just replace it when you get a chance.
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: May 18, 2004 at 9:58 PM / IP Logged  

     I'd say use it as long as it does the job.  You could test the rating of it by connecting a lower ohm load (briefly, and at your own risk!), but I would guess that it is 4 ohm stable bridged, like most mosfet amps.  And you could always test the output voltage with a multimeter.

cheap products encourage experimentation;  expensive ones do not.  they allow us to be inventors ______stevdart

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer