the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Which sets of speakers to amplifiy? front or rear?


Post ReplyPost New Topic
< Prev Topic Next Topic >
ryung97 
Member - Posts: 4
Member spacespace
Joined: August 25, 2002
Location: Canada
Posted: September 06, 2002 at 9:46 AM / IP Logged  

Hi.. I am a newb and would like to hear some opinions from you guys.

I am currently running a 4 channel amp (4 x 75W rms)to my 4 speakers, two 6.5" 2-way front and two 6x9 3-way rear.

I am thinking of adding one 10" sub to my system to thicken the bass. Now here comes to dilemma. Should I bridge my rear channel and leave the 6x9 to the head unit (19W rms from head unit), but then I am afraid to loose my mid from the 6x9, or should I bridge my front channel and leave the 6.5" to the head unit but then would the rear and sub be overpowering the front which is closest to the driver seat? what about tri-mode config., I am also thinking of using the rear channel to set up the tri-mode config, since I am just looking to add a little substance to the bass, I don't mind losing some amp power to the tri-mode config. Any comments on which setup is better??

Thanks!

the12volt 
Administrator - Posts: 3,955
Administrator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 07, 2002
Location: Louisiana, United States
Posted: September 06, 2002 at 10:02 AM / IP Logged  

I would amplify the front and sub and run radio power to the rear.  When you go to a concert, do you face the band or turn your back to them? When you listen to your home stereo, do you place the primary speakers in front of you or behind you? See where I'm going? Rear speakers should be used for fill and ambience and should not be a focal point in a L&R stereo system.  However, if you prefer to amplify the rear instead of the front and you like it better that way, than do it. The sound police will not come and get you :) All that matters is that you like it.

teampimp 
Member - Posts: 19
Member spacespace
Joined: August 30, 2002
Location: Canada
Posted: September 06, 2002 at 6:00 PM / IP Logged  
Go for subs and rears. or even better pickup a small mono sub and have complete power!
GlassWolf 
Copper - Posts: 365
Copper spacespace
Joined: June 22, 2002
Location: South Carolina, United States
Posted: September 06, 2002 at 8:28 PM / IP Logged  
forget the rears. those are for rear fill and nothing more. many higher end systems don't even USE rear fill.
amp the fronts to pronounce the soundstage.
you want a good soundstage, thus need the clarity and volume in teh front, and at the subs, also to prevent muddy bass and unclear highs when the bass does hit.
-GlassWolf
Pioneer Stage-4, Orion, DynAudio, Fi

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer