the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

handsfree kit in Envoy


Post ReplyPost New Topic
< Prev Topic Next Topic >
tgold 
Member - Posts: 3
Member spacespace
Joined: June 28, 2004
Location: United States
Posted: June 28, 2004 at 1:55 PM / IP Logged  

I installed a handsfree kit in my prior vehicle. It was pretty simple since the owners manual had the instructions and where the aux power harness was and what the colors were for.

I just purchased a new 2004 Envoy XUV and want to install the handsfree unit. It is a Samsung kit with a black, brown, yellow and a red wire. I can not find my install manual for the handsfree kit and can not remember what is what. I know the black is ground. I would assume the red is constant 12v, yellow is ignition turn on. Brown maybe mute feature which I did not use before. Can someone direct me the best palce to make these connections and correct my assumptions if I am wrong.

Also I would love to know if it is possible to connect (I heard rumor) to the XM connection into the Bose Navigation head unit for the mute feature. I heard you could wire to this and phone call would come on the Nav screen while muting the stereo. This would be awesome.

NowYaKnow 
Gold - Posts: 1,217
Gold spacespace
Joined: December 18, 2002
Posted: June 28, 2004 at 7:06 PM / IP Logged  
Normally the wires are like so:
Black = Ground
Yellow = Constant
Red = Ignition
Unfortunately not all units confirm to these standard colors, so it's possible your red is constant and the yellow is ignition. In your case, you won't find an ignition wire at the back of the radio, so you might want to go directly to the ignition switch. In that case, you would tap the thick red wire (constant) and the thick orange or brown wire (accessory). Brown I would also assume is for mute, but I doubt you'll be able to put it to much use.
Sorry but I have no idea of the abilities to interface with the nav screen for muting the stereo.
Good luck,
Mike
tgold 
Member - Posts: 3
Member spacespace
Joined: June 28, 2004
Location: United States
Posted: June 30, 2004 at 6:43 AM / IP Logged  

Mike,

Thank you so much for your assistance. It went so smooth I had time to install a PS2 in the back!!!

Terry


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 16, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer