2 Ohms out of a 4 Ohm

Home / the12volt's Install Bay / Car Audio / 2 Ohms out of a 4 Ohm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

eedukes

Member - Posts: 33

Joined: August 30, 2002

Location: United States

Posted: September 12, 2002 at 8:08 AM / IP Logged

Is it possible to get a 2 Ohm load out of a 4 Ohm SVC speaker? The amp I am running to my mids and hi's doubles output at 2 Ohm stereo. Right now it is at 4 Ohm stereo.

Back to Top

the12volt

Administrator - Posts: 3,955

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 07, 2002

Location: Louisiana, United States

Posted: September 12, 2002 at 8:31 AM / IP Logged

No, you can not get a 2 ohm load from one 4 ohm SVC woofer. If you connect a second 4 ohm SVC woofer in parallel with the first you can.

Back to Top

eedukes

Member - Posts: 33

Joined: August 30, 2002

Location: United States

Posted: September 12, 2002 at 8:55 AM / IP Logged

Yeah, I know I can do it if I add a second spkr in parallel with the first, but I was wondering if anyone made a contraption of some sort like a 4 ohm resistor that would allow the amp to see a 2 ohm load as if it were in parallel.

Back to Top

the12volt

Administrator - Posts: 3,955

Joined: March 07, 2002

Location: Louisiana, United States

Posted: September 12, 2002 at 10:20 AM / IP Logged

I believe this is what you're looking for: http://www.veritasaudio.com/match.htm

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2 Ohms out of a 4 Ohm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.