what amp do you recommend?

It´s me again guys!Now, I want you to recommend me a good and not expensive amp for my subwoofer.This is a HED-10 Cerwin Vega, with DVC.Besides, I don´t want to be heared 3 blocks away, nor enter a competition.Thanks and Salute!Eggs putines!

well, as you hopefully know and understand, that is a dual 4ohm woofer that can handle 200W RMS and 500 peak. I'm not sure if you are on a budget or not but I would reccomend putting the full 200 watts into it just because CV is a fine woofer manufacturer and that sub will thrive on all 200 watts. Seeing as it is dual 4, i would find a 2 channel ampo and wire the voice coils in parralel to create a 2ohm load to the amp. You need to know that you want to hook the coils to the same channel which is "mono". Many 2 channel amps will say "2ohm stable" but then if you read the fine print, they are only 2ohm stable in stereo mode, not mono as i have described. If you want to make te job easier, find a nice 200W mono amp and that will make life that much easier. But to tell you the truth, its a little difficult to find a mono amp that puts out only 200W. And most of the 2 channels aren't cabable of a 2ohm load when bridged. This would have been so much easier if you had 2 woofers or at least a dual 2ohm but what can ya do. But i managed to find this Coustic amp coustic600db But it still isa little overpowering (300W at 2 ohms). This one is a little better: Hifonics brutus bx500D. I happen to be a fan of Hifonics but again, this one is 50 watts over the "reccomended" RMS for your woofer. I tend to think as long as you are careful, you might be able to get away with it. Just keeo the gain turned down, pay attention to distortion levels, and use a sealed enclosure. Hope this helped. Oh, I only used sound domain because they are well organized. The prices are high so I would look on ebay once you pick an amp.

{p}and what will happen if I use the Sony Xplod amp that I have...{/p}{p}In the specs is: {SPAN lang=EN-US style="FONT-SIZE: 10pt; COLOR: #333333; FONT-FAMILY: Verdana; mso-fareast-font-family: 'Arial'; mso-bidi-font-family: 'Arial'; mso-ansi-language: EN-US; mso-fareast-language: ES; mso-bidi-language: AR-SA"}1 Ch x 120W at 4 ohm (0.1% THD) {/SPAN}{/p}{p}{SPAN lang=EN-US style="FONT-SIZE: 10pt; COLOR: #333333; FONT-FAMILY: Verdana; mso-fareast-font-family: 'Arial'; mso-bidi-font-family: 'Arial'; mso-ansi-language: EN-US; mso-fareast-language: ES; mso-bidi-language: AR-SA"}And connect the coils in series, to get 8 ohms load...{br}{br}Will it work good?{/SPAN}{/p}{p}{SPAN lang=EN-US style="FONT-SIZE: 10pt; COLOR: #333333; FONT-FAMILY: Verdana; mso-fareast-font-family: 'Arial'; mso-bidi-font-family: 'Arial'; mso-ansi-language: EN-US; mso-fareast-language: ES; mso-bidi-language: AR-SA"}{/SPAN} {/p}{div style="width:240px;border-bottom:1px solid #eeeeee;margin-top:10px;margin-bottom:0px;"}{/div}{span style="font-size:.70em;line-height:1.2em;color:#000000;"}Eggs putines!{/span}Please do not copy and paste from a rich text editor like Microsoft Word. Please copy and paste from a plain text editor like Notepad.