Amp not turning on

This is the first amp I have installed so who know's what is wrong. After I installed everything and connected the battery. I turned on my car and no power to the amp. It's not truning on. I check everything twice to make sure I had done it right. I checked the lead and it's connected right. I'm not sure what it could be. Should I re-install it again?

What did you use as a remote turn on lead?Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

I used the remote turn on wire from the alpine d900. Is the the correct wire?

Check for power at the amplifier and the turn on lead. Also check your fuses and ground.Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

do you have a ditigal Multimeter?    you would be able to solve this very quickly,   12 volts at power wire? 12 volts at remote?2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

If you doubt that the remote wire isn't working, just go to the amp and short the power and remote on the amp and the amp should start. If it still does not start, you don't have ground and/or power to the amp, assuming the amp is good.