split audio signal to 3?

Home / the12volt's Install Bay / Car Audio / split audio signal to 3? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Farwell

Member - Posts: 35

Joined: April 08, 2003

Location: United States

Posted: September 14, 2004 at 3:51 PM / IP Logged

How do I split the audio out from a dvd player to 3? I need to go to an aux. input device and two screens that have IR (and not audio out). I don't want to degrade the signal. thanks

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: September 14, 2004 at 4:23 PM / IP Logged

The best way is by using a D/A (distribution amplifier) or a line driver.

Support the12volt.com

Back to Top

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: September 14, 2004 at 6:41 PM / IP Logged

if you start splitting 3 diffrent, i would go with a line driver unless you have a decent powered dvd player....also if you are running the audio to the screens, are you going to use the rca's? if so I would go with a line driver for sure, you will lose to much power trying to devide a 5 volt source into 3 sources

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Back to Top

Farwell

Member - Posts: 35

Joined: April 08, 2003

Location: United States

Posted: September 14, 2004 at 11:28 PM / IP Logged

What do you guys think about using this http://www.cardomain.com/item/AVXVA100 ? It will also boost my video of which I need. Will I add "noise" to the system if I hook the power wires to this booster (actually I need to for dvd and Xbox-screens have 2AV inputs) with the power supplies of dvd and screens. So one big wire from battery to 2 screens, 2 boosters, and dvd player. I'll ground the grounds together and keep it short. Will this be ok? thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

split audio signal to 3?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.