good mids

Home / the12volt's Install Bay / Car Audio / good mids (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hbk00

Copper - Posts: 64

Joined: November 11, 2003

Location: United States

Posted: September 15, 2004 at 3:17 PM / IP Logged

Just a general question from an ignorant person, I have a 400wt crossfire amp and it had been fueling my crossfire bmf 6.5" with a coaxil tweeter. I had them in a pair of kicks I made. Well its been a year or so I one of my mids is done, cashed, un useable so time for new ones however I can't find the same mids anymore so I'm looking for any suggestions on another set of 6.5" that are good quality and can handle 400wt, between the both. Preferable with a coaxil tweeter again so I dont have to glass more kicks but if I had to I'd do it again. I just don't know whats good quality in mids. Thanks guys

go custom or go home!!

Back to Top

kfr01

Gold - Posts: 2,121

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 30, 2003

Posted: September 15, 2004 at 3:48 PM / IP Logged

Check out quality components with coax mountable tweeters. My Mb Quart PCE components are mounted in the coax position and I am pleased with how they sound for the money. Image Dynamics also has coax mountable tweeters to one of their component sets.

If it was me looking at a fresh set and willing do without the coax mountable tweeter the first sets I would check out would be the Adire Koda or Resonant Engineering sets. I haven't heard either set, but just keep hearing wonderful things.

Also, what is your amp putting out RMS per channel? Max wattage doesn't really mean much.

New Project: 2003 Pathfinder

Back to Top

94legend

Silver - Posts: 237

Joined: June 27, 2004

Location: United States

Posted: September 15, 2004 at 4:20 PM / IP Logged

About mids, interior speakers. When running the interrior speakers, the deck alone will not have enough power to distribute to the speakers. When deciding to run an amp, and using a sound converter to have an RCA out put to insert to the amp. Which wire harness from the deck would you have to tap into?

Depending on the amp, what are the ranges of wattage / rms to the power guage size ? ie. 500 / 8 guage 1000 / 4 guage etc.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

good mids

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.