help on DVC and 2 ch amp

Home / the12volt's Install Bay / Car Audio / help on DVC and 2 ch amp (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

southwest2118

Member - Posts: 30

Joined: November 16, 2003

Posted: October 04, 2004 at 8:43 PM / IP Logged

Hey every one my name is Arun I¡¦m not new to this site but I don¡¦t post alot of messages but I have a question for all you bass heads.

I have one rf dvc 4+4 and a sony xm-2150gsx thats a 2 channel amp and i'm trying to get it to push this dvc to its best ability. I tried to hook it up Parallel where it threw out 2 ohms and only use one channel off the amp and but it goes on overload. Then I tried to put one coil to each channel and it doesn¡¦t do nothing well a little but my ear cant pick it up.

Can some one please tell me how i should hook it up?

The anp is like this :

760 Watts Max Power (into 2 ohms)

150 Watts x 2 into 4 Ohms, 20-20 kHz at 0.04% THD

380 Watts x 1 into 4 Ohms, 0.1% THD

Back to Top

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: October 04, 2004 at 9:01 PM / IP Logged

considering this amp is not 2 ohm mono stable your option would be to wire your subs in series pos to neg pos to neg then bridge on the amp to give each side a 4 ohm load in mono

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Back to Top

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: October 04, 2004 at 9:43 PM / IP Logged

As Jeff said, this is your only option to connect one sub to that amp:

help on DVC and 2 ch amp -- posted image.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Back to Top

southwest2118

Member - Posts: 30

Joined: November 16, 2003

Posted: October 06, 2004 at 2:31 PM / IP Logged

so what your saying is if i run it in series then bridge it and each coil will be 4ohm?

And sorry i posted another message like this. i tryied to go back so i can get email notify.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

help on DVC and 2 ch amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.